Microplate Washers and Accessories
Tri Continent Scientific StatMatic I, 8-Channel Microplate Washer And Bottle Top Dispenser
The Next Best Thing to Automation. The StatMatic I microplate washer and bottle top dispenser provides a convenient and affordable alternative for diagnostic assays and cell culture work. Used with an eight-port disposable manifold, the StatMatic I microplate washer and bottle top dispenser provides continuous operation not possible with multi-channel pipettes. Eight-port manifold, designed for 96-well microplates, delivers fluids in volumes of 100, 200, 250, or 300 L with well-to-well accuracy of 5% or better; Constructed of polypropylene, Teflon, glass, and ceramics, there is no exposed glass that can break and requires minimal maintenance. ; Compatible with most reagents and chemicals and designed so that even protein-based reagents won't cause sticking. ; Filtered air vent keeps liquids free of contaminants. ; Priming line allows recirculation into the dispenser port without removing the bottle.
Hach Company Flare, Cell/Waste - 13 cm (Replacement for FIA cell/waste lines)
This 13 cm flare is a replacement component for cell/waste lines used in flow injection analysis (FIA) systems.
- 13 cm length.
- Replacement part for cell/waste lines in flow injection analysis systems.
- Functions as a flare to direct waste away from the measurement cell.
Bluecatbio Ma Inc DISPENSE FILTERS, PACK OF 10
Pack of 10 dispense filters. Typically sufficient to replace waste filter annualy as part of the BlueCatbio preventative maintance serivce. If particles enter through dispensed liquids, or clogging occurs, can be replaced by user as needed.
Molecular Devices Wash Head, 96-Well, AquaMax 2000, AquaMax 4000
The 96-Well Microplate Wash Head (0310-5216T) is a replacement wash head component manufactured for use with Molecular Devices AquaMax 2000 and AquaMax 4000 microplate washers. It provides standard 96-well plate washing capability and installs into the washer's wash head assembly.
- Supports 96-well microplate format.
- Provides uniform well washing across standard microplates.
- Designed for straightforward installation into the wash head assembly.
- Suitable for routine plate washing and cell-wash protocols.
- Supplied as a component for wash head maintenance and replacement.
Electron Microscopy Sciences Diamond Stylus for Microscope Slide Labelers
This diamond stylus is perfectly suited for the Thermo Scientific PrintMate and MicroWriter, RA Lamb and TBS Shurmark microscope slide labelers. Manufactured with a consistent even coating of diamond dust. The 2.35 mm shaft is made from stainless steel.
Electron Microscopy Sciences CoverWell™ Modular Hybridization System, 13 dia x 0.7 mm
Flexible, press-to-seal gasket and coverslip enclosures which can be quickly assembled and disassembled for the specialized challenges of hybridizing and imaging thick and free- floating specimens.
All steps from permeabilizing to image analysis are made easy and trouble free with chambers you assembles from modular components.
For neural explants, plant, or animal specimens of any texture and thickness.
Build up to three chambers on one microscope slide. Ideally suited for overnight hybridizations and agitated washing steps. The screen is made from polyester and is 1.6 mm square.
Size: 13 dia x 0.7 mm
Bio Rad Laboratories SHEATH FLUID BOTTLE
Microplate Instrumentation Accessories; Sheath Fluid Bottle; Bio-Rad; Polypropylene; With sheath-fluid and air-intake ports and tubing; For use with the Bio-Plex 200 system; 1L
DSI LLC SOLUPREP™ II
The Soluprep™ II solution preparation system automatically calculates and dispenses the exact amount of solvent required to prepare a precise concentration based onthe approximate mass of solute added by the operator. The Soluprep II prepares samples gravimetrically, rather than volumetrically.
Molecular Devices Waste Reservoir, 10 L, Plastic, Replacement
The Molecular Devices 10 L AquaMax waste reservoir is a replacement waste collection bottle for AquaMax microplate washers (models 2000 and 4000). It provides 10 liters of capacity and connects via the supplied cap and tubing for efficient waste handling during plate-washing operations.
- 10 L capacity for extended plate-washing runs.
- Supplied with cap, fluid tubing, and waste tubing for straightforward installation.
- Plastic construction; inspect and replace when signs of aging appear.
- Designed for laboratory waste collection during microplate washing workflows.
- Supports standard bottle connections used with microplate washer accessories.
Electron Microscopy Sciences CoverWell™ Modular Hybridization System, 13 dia x 0.6 mm
Flexible, press-to-seal gasket and coverslip enclosures which can be quickly assembled and disassembled for the specialized challenges of hybridizing and imaging thick and free- floating specimens.
All steps from permeabilizing to image analysis are made easy and trouble free with chambers you assembles from modular components.
For neural explants, plant, or animal specimens of any texture and thickness.
Build up to three chambers on one microscope slide. Ideally suited for overnight hybridizations and agitated washing steps. The screen is made from polyester and is 1.6 mm square.
Size: 13 dia x 0.6 mm
Molecular Devices Sterilant Kit, AquaMax Compatible, Concentrate, 2 Hour Soak
The Molecular Devices AquaMax Sterilant Kit is a two-part sterilant system designed to decontaminate and maintain AquaMax microplate washers. When prepared and applied as directed, it loosens protein and salt buildup, clears clogs, and removes endotoxin adherence from internal fluid paths.
- Includes a concentrated sterilant and a separate diluent for on-instrument preparation.
- Loosens protein and salt deposits and removes tough clogs from fluidic paths.
- Reduces endotoxin adherence on interior fluid path surfaces.
- Prepared by mixing the concentrate into the diluent, then transferring to a reservoir bottle.
- Recommended two-hour soak after running the Clean program, followed by a distilled water flush.
- Highly corrosive; use appropriate personal protective equipment and follow the supplied safety data.
Electron Microscopy Sciences CoverWell™ Modular Hybridization System, 13 dia x 0.7 mm
Flexible, press-to-seal gasket and coverslip enclosures which can be quickly assembled and disassembled for the specialized challenges of hybridizing and imaging thick and free- floating specimens.
All steps from permeabilizing to image analysis are made easy and trouble free with chambers you assembles from modular components.
For neural explants, plant, or animal specimens of any texture and thickness.
Build up to three chambers on one microscope slide. Ideally suited for overnight hybridizations and agitated washing steps. The screen is made from polyester and is 1.6 mm square.
Size: 13 dia x 0.7 mm